Black & Decker M-47 Series Instruction Manual page 11

•
ACCESSORIES
The accessories listed in this manual are available at extra cost from your
dealer, Black & Decker Service Center or by writing to: Black & Decker Canada
Inc., 100 Central Ave., Brockville, Ontario K6V 5W6.
Type Speed Teeth
Type of Material of of Per Blade
Blade To Be Cut
Cut Cut
Inch Length
Wood Cutting
-Coarse
Soft wood
Rough
Fastest 7
3"
Wood Cutting Soft wood
-Fine
3/4" and thicker
Medium Medium
10 3"
Hollow Ground Hard wood
under 3/4" thick Smooth
Medium
7 3"
Hollow Ground Soft & hard wood
Plywood, Formica Extra Fine Medium 10 4-1/4"
Hollow Ground Soft & hard wood
Plywood Smooth Medium 6 4-1/4"
Hollow Ground Soft
& hard wood
,~
.. -
-~~=·h.
Medium 6 4-1/4"
Medium 10
3"
Hollow Ground Plywood Smooth Medium
7
3"
Fast
Hollow Ground Plywood Medium Fast
5 3"
Plaster Cutting Plaster, plastic Rough Fast
9 3-5/8"
Fleam Ground Green or wet wood Medium Medium 10 4"
Fleam Ground
Green or wet wood Rough Fast 6 4"
Scroll Cut Soft & hard wood
Plywood, plastic Smooth Medium 10 2-3/4"
Metal Cutting Ferrous & non- Medium Medium
ferrous metals Fine Slow
14 2-3/4"
Metal Cutting Ferrous & non-
ferrous metals Smooth Medium 18 2-3/4"
Metal Cutting Ferrous (iron)
metals Fine Slow 24 2-3/4"
Metal Cutting Ferrous (iron)
Very
metals
Fine Slow 32 2-3/4"
Knife Blade leather, rubber
Knife
composition tile Smooth
Fast
Edge
3"
Skip Tooth Plywood, plastics Rough
Fast 5 3"
2-way Cutting Most wood & Rough Fast
7 3"
Fiber building
materials
Medium Medium 10 3"
Flush Cutting
Soft & hard wood
over 1/4" thick Rough Fast 7
3"
Recommended accessories for your saw are listed above. THE USE OF
ANY OTHER ACCESSORIES OR ATTACHMENTS MAY BE HAZARDOUS.
11