Black & Decker MT250 Instructions Manual

Oscillating tool
Hide thumbs Also See for MT250:




Table of Contents

Summary of Contents for Black & Decker MT250

  • Page 1 MT250...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker oscillating tool has been designed for protected supply. Use of an RCD reduces the risk of DIY applications such as sanding operations.
  • Page 5: Safety Of Others

    (Original instructions) ENGLISH d. Store idle power tools out of the reach of children and The intended use is described in this instruction manual. do not allow persons unfamiliar with the power tool or The use of any accessory or attachment or performance these instructions to operate the power tool.
  • Page 6: Electrical Safety

    ENGLISH (Original instructions) Accessories Vibration The declared vibration emission values stated in the technical This tool includes some or all of the following accessories. data and the declaration of conformity have been measured The performance of your tool depends on the accessory used. in accordance with a standard test method provided by Black &...
  • Page 7 (Original instructions) ENGLISH Press the sheet firmly and evenly onto the sanding base, Carbide grout removal blade. making sure that the holes in the sheet coincide with the (Part number - X26125-XJ) holes in the base. Carbide coated surface ideal for clearing grout and tile adhesive from Removing a sanding sheet flat surfaces and for fast stock...
  • Page 8: Hints For Optimum Use

    ENGLISH (Original instructions) Switching on and off (fig. H) Mains plug replacement (U.K. & Ireland only) To switch the tool on, slide the on/off switch (1) forward If a new mains plug needs to be fitted: (position I). Safely dispose of the old plug. To switch the tool off, slide the on/off switch (1) to the rear Connect the brown lead to the live terminal in the new (position O).
  • Page 9: Technical Data

    ENGLISH Technical data Guarantee Black & Decker is confident of the quality of its products and MT250 (Type 1) offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. Voltage The guarantee is valid within the territories of the Member...
  • Page 11 ENGLISH Do not forget to register your product! Register your product online at or send your name, surname and product code to Black & Decker in your country.
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual is also suitable for:


Table of Contents