Intended use 3. Personal safety Your Black & Decker multi-purpose tool has been designed for a. Stay alert, watch what you are doing and use a wide range of DIY applications. common sense when operating a power tool. Do not Using the screwdriver head, this tool is intended for use a power tool while you are tired or under the screwdriving applications.
Page 5
Keep cutting tools sharp and clean. Properly Motor unit maintained cutting tools with sharp cutting edges are less 1. On/off switch likely to bind and are easier to control. 2. Lock-on button g. Use the power tool, accessories and tool bits etc., 3.
Page 6
To remove the screwdriver bit from the bit storage press Align the tab on the clamp plate (11) with the slot in the the bit down into the bit holder recess (4), then lift the bit shaft (10) and the blade. out.
Do not exert too much pressure on the tool. Maintenance Technical data MT3000K Your tool has been designed to operate over a long period of Voltage time with a minimum of maintenance. Continuous satisfactory Power input operation depends upon proper tool care and regular cleaning.
EC declaration of conformity Please visit our website www.blackanddecker.co.uk to MT3000K register your new Black & Decker product and to be kept up to Black & Decker declares that these products conform to: date on new products and special offers. Further information 98/37/EC, 89/336/EEC , 2002/95/EC, EN 60745 , EN 55014 , on the Black &...