Black & Decker MT218 Original Instructions Manual
Black & Decker MT218 Original Instructions Manual

Black & Decker MT218 Original Instructions Manual

Hide thumbs Also See for MT218:


Quick Links



Table of Contents

Summary of Contents for Black & Decker MT218

  • Page 1 MT218
  • Page 2 English (original instructions)
  • Page 3: Intended Use

    Intended use Your BLACK+DECKER MT218 - multi-purpose tool has been designed for a wide range of DIY applications. Using the drill/screwdriver head (MTDD6), this tool is intended for screwdriving applications and for drilling in wood, metal and plastics. This tool is intended for consumer use only. Your BLACK+DECKER charger has been designed for charging BLACK+DECKER batteries of the type supplied with this tool.
  • Page 4 ENGLISH (Original instructions) Save all warnings and instructions for future reference. c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source The term "power tool" in the warnings refers to your mains- and/or battery pack, picking up or carrying the tool. operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 5: Residual Risks

    (Original instructions) ENGLISH Additional power tool safety warnings g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into Warning! Additional safety warnings for account the working conditions and the work to screwdrivers. be performed. Use of the power tool for operations Hold the power tool by insulated gripping surfaces, different from those intended could result in a when performing an operation where the cutting...
  • Page 6 ENGLISH (Original instructions) risks can not be avoided. These include: Do not attempt to charge damaged batteries. Injuries caused by touching any rotating/moving parts. Injuries caused when changing any parts, blades or accessories. Chargers Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular Use your BLACK+DECKER charger only to charge the breaks.
  • Page 7 (Original instructions) ENGLISH Depress the battery release button (6) as shown in (fig. B) this is normal and does not indicate a problem. and pull battery pack out of tool. Warning! Do not charge the battery at ambient temperatures below 10 °C or above 40 °C. Recommended charging tem- Fitting and removing tool heads (fig.
  • Page 8: Protecting The Environment

    Make an indentation using a centre punch at the centre of the hole to be drilled in order to improve accuracy. Technical data Screwdriving MT218 Always use the correct type and size of screwdriver bit. Voltage If screws are difficult to tighten, try applying a small Drill/Screwdriver MTDD6 amount of washing liquid or soap as a lubricant.
  • Page 9: Ec Declaration Of Conformity

    The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker. MT218, MTDD6 - Drill Black & Decker declares that these products described under “technical data” are in compliance with: The Supply of Machinery (Safety) Regulations, 2008, S.I.
  • Page 12 Australia & New Zealand Stanley Black & Decker Tel. 1800 338 002 (Aus) 810 Whitehorse Road Box Hill VIC 3128, Tel. 0800 339 258 (NZ) Australia United Kingdom & BLACK&DECKER UK Tel. 01753 511234 Republic Of Ireland 270 Bath Rd, Slough SL1 4DX 01753 512365 England...

Table of Contents