Technical Data - Smeg HOBD472D2 User Manual

E8 Cooking areas are turned
off.
E4 Disconnect the hob from the power supply.
E5 Wait a few seconds, then reconnect the hob to the power supply.
E7 If the problem persists, call the After Sales Service and specify the error code that appears on the dis-
play.
E9
ER20
ER22
ER31
ER36
ER42
ER47
EA
EH
Fan not working.
Hood not working.
TC = TOUCH CONTROL
UI = USER INTERFACE
NTC = TEMPERATURE SENSOR

17. TECHNICAL DATA

Product identification
Type: 4300
Model: HOBD482D2
Model: HOBD472D2
Please see the identification plate af-
fixed to the bottom of the product.
The manufacturer makes continual im-
provements to
reason, the text and illustrations in these
instructions for use may change without
warning.
Further information on the technical
data is available on the website:
www.smeg.com
32
Fan fault.
Fan blocked by dust or fibres.
Fan cable unplugged.
Power cable.
Cable unplugged.
products. For
MODEL
MODEL
Total maximum power (hob and
hood)
Total maximum power (hob and
hood)
Total maximum power (hob and
hood)
Total maximum power (hob and
hood)
this
1,2 Flexible cooking area 1 + 2 In bridge
3,4 Flexible cooking area 3 + 4 In bridge
Parameter
HOBD482D2
Working dimensions
HOBD472D2
Working dimensions
Power supply
voltage/frequency
Clean and remove foreign bodies
from the fan.
If the error persists, please contact
the After-Sales Service.
Connect the cable.
Reconnect the hood power cable
found towards the front right under-
neath the hob.
HOBD482D2
HOBD472D2
7.62 Kw (basic setting)
4.72 Kw
3.72 Kw
3.02 Kw
Value Dimensions
- 830 × 520 (W x
- 700 × 520 (W x
220-240 V, 50 Hz; 220
V, 60 Hz 3N~ / 2N~
380-415 V, 50 Hz;
3N~ / 2N~ 380 V, 60
Hz
(mm)
D)
D)