Pos: 56 / Beko Techni s che D ok um ent at i o n/ Ü ber schr i f t en/ 1/ Kont r ol l e und War t ung @ 0\ m od_118363788 5371_1 5098. docx @ 15106 @ 1 @ 1
11 Control and maintenance
Pos: 57 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / G ef ahr D r uckl u f t @ 0 \ m od_11841481438 54_1509 8. docx @ 15121 @ @ 1
Danger!
Compressed air!
Risk of serious injury or death through contact with quickly or suddenly escaping com-
pressed air or through bursting plant components or plant components which are not
secured.
Pos: 58 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / M aßnahm en D r uckl uf t BM @ 0 \ m od_11841482842 91_150 98. docx @ 15123 @ @ 1
Measures:
•
Do not exceed the maximum operating pressure (see type plate).
•
Only carry out service measures when the system is pressure less.
•
Use pressure-resistant installation material only.
•
The feed pipe must be tubed firmly. Discharge pipe: short, fixed pressure hose onto pressure-resistant
pipe.
•
Make sure that persons or objects cannot be hit by condensate or escaping compressed air.
Pos: 59 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / G ef ahr N et zspannung 1 s/ w @ 0\ m od_1184148186948 _15098. docx @ 15122 @ @ 1
Danger!
Supply voltage!
There is the risk of an electric shock involving injury or death when coming into contact
with non-insulated components carrying supply voltage.
Pos: 60 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / M aßnahm en N et zspann ung BM 31U / 32U / 33 U @ 7\ m od_13904671 97804_1 5098. docx @ 38070 @ @ 1
Measures:
•
During electric installations, all regulations in force need to be adhered to (e.g. VDE 0100 / IEC 60364).
•
When the control unit is open, service and installation works must only be undertaken when the
system is deactivated.
•
The removed control unit has no IP degree of protection.
•
All types of electrical works must be carried out by authorized and qualified personnel only.
Pos: 61 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / Vor si c ht Fehl f unkt i on @ 0\ m od_121437809 6290_15 098. docx @ 15237 @ @ 1
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
BEKOMAT.
Condensate which is not discharged may cause damage to plants and in production
processes.
Pos: 62 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / M aßnahm en Feh l f unkt i o nen BM @ 0\ m od_12143784 34025_1 5098. docx @ 15238 @ @ 1
r
Measures:
•
Condensate drainage which is reliable in performance directly optimizes the compressed-air quality.
•
To prevent damage and breakdowns, it is imperative to observe the following:
•
Exact compliance with the specifications of use and with the performance parameters of the
BEKOMAT, in connection with the case of application (see "Proper use" section)
•
Exact compliance with the installation- and operation instructions in this manual
•
Regular maintenance and control of the BEKOMAT in accordance with the instructions in this oper-
ating manual
Pos: 63 / - - - - Sei t enum br uch - - - - @0\ m od_1157028099015_ 0. docx @ 15320 @ @ 1
BEKOMAT® 32U F
Control and maintenance
19