Table of Contents
Advertisement
Danger!
Supply voltage!
There is the risk of an electric shock involving injury or death when coming into contact
with non-insulated components carrying supply voltage.
Pos: 12 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / M aßnahm en N et zspann ung BM 31U / 32U / 33 U @ 7\ m od_13904671 97804_1 5098. docx @ 38070 @ @ 1
Measures:
•
During electric installations, all regulations in force need to be adhered to (e.g. VDE 0100 / IEC 60364).
•
When the control unit is open, service and installation works must only be undertaken when the
system is deactivated.
•
The removed control unit has no IP degree of protection.
•
All types of electrical works must be carried out by authorized and qualified personnel only.
Pos: 13 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / Si c her he i t shi n w ei s e, w ei t er e BM ( ni c ht Ex, ni c ht I F) @ 0\ m od_1183616103 770_15 098. docx @ 15100 @ @ 1
Further safety instructions:
•
For installation and operation, the national regulations and safety codes in force must also be adhered
to.
•
Do not use the BEKOMAT
•
Regarding the inlet screw joints, excessive tightening forces must be avoided. This applies in particular
to conical screw joints.
®
•
The BEKOMAT
32U will only function when voltage is applied.
•
Do not use the test button for permanent drainage.
•
Use genuine spare parts only. This is imperative to ensure perfect functioning.
Pos: 14 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / Zusat z Si c her he i t shi n w ei s e BM 3 1/ 32 SA +31U / 32 U SA @ 0\ m od_1185351 496993 _15098. docx @ 15150 @ @ 1
Additional advice:
•
The removed control unit has no IP degree of protection.
•
During installation, use spanner flat at the feed pipe (wrench size SW27) as a back rest.
•
The service unit must not be dismantled.
Pos: 15 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / Vor si c ht Fehl f unkt i on @ 0\ m od_121437809 6290_15 098. docx @ 15237 @ @ 1
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
BEKOMAT.
Condensate which is not discharged may cause damage to plants and in production
processes.
Pos: 16 / Beko Techni s che D ok um ent at i o n/ Si c h er hei t / M aßnahm en Feh l f unkt i o nen BM @ 0\ m od_12143784 34025_1 5098. docx @ 15238 @ @ 1
r
Measures:
•
Condensate drainage which is reliable in performance directly optimizes the compressed-air quality.
•
To prevent damage and breakdowns, it is imperative to observe the following:
•
Exact compliance with the specifications of use and with the performance parameters of the
BEKOMAT, in connection with the case of application (see "Proper use" section)
•
Exact compliance with the installation- and operation instructions in this manual
•
Regular maintenance and control of the BEKOMAT in accordance with the instructions in this oper-
ating manual
Pos: 17 / - - - - Sei t enum br uch - - - - @0\ m od_1157028099015_ 0. docx @ 15320 @ @ 1
BEKOMAT® 32U F
®
32U in hazardous areas.
Safety instructions
5
Advertisement
Table of Contents
