Advertisement
Section 3: Mounting
Flush Mount
Flush-mount Bracket Installation Notes:
Bracket shape varies for each model, drawing for illustration purposes
only. See dimensional drawing for exact dimensions.
1. Attach bracket "A" To
touchscreen display
2. Attach bracket "C' to customer panel per drawing (all four sides)
3. Attach bracket "B" to bracket "C" on all four sides with M4 screws (included)
4. Adjust depth of bracket "B" so monitor is flush with customer panel
touchscreen display
5. Place
into customer panel opening
touchscreen display
6. Secure
Side Bracket Mount
Side-mount Bracket Installation Notes:
Bracket shape varies for each model, drawing for illustration
purposes only. See dimensional drawing for exact dimensions.
(all four sides) with M4 screws (included)
to bracket "B" from behind with M4 screws (included)
User Manual: 90 Series RevB
UM600129 Rev D, page 7 of 28
Advertisement
