Advertisement
Available languages
Available languages
How to operate
REMAIN
OY
REMAIN
"A
"Lu
P. EDIT
SIDE-B
STEP
EACH
— REMAIN
829:00
47 =
How to Perform
Programming Edit Recording
1
1
1.Press the [STOP ( )/CANCEL] button.
2.Press the [EDITING] button until P EDIT i
displayed in the MULTI-MODE DISPLAY.
3. Set the recording time according to the type c
tape cassette loaded, using the [TIME/TRACI
(+10, +1)] buttons.
[Example]
To set a period of 46 minutes, press the [+1C
button four times and then the [+1] button si
times.
4. Press the [SIDE A/B] button.
5.Press the [DISC] button @* to specify th
disc required.
Total playing time appears in the MULTI
MODE DISPLAY.
6.Press the [SEARCH ( 4, mpi )] or [TIME
TRACK (+10, +1)] button to indicate the trac
number
required
and then
press
th
[MEMORY] button, while both the track numbe
and the step number are flashing.
Once a selection has been programmed, it
playing time is automatically subtracted fror
the set recording time and the time remainin,
is displayed.
7. Repeat steps 5 and 6 to programme.
8.When programming of the A side of the tapi
is completed, press the [SIDE A/B] button.
9. Repeat steps 5 and 6.
0. Set the cassette deck to the recording mode
1.Press the [PLAY ( » )/PAUSE (1 )] button.
When the final selection, programmed on th
A side, ends, CD player-changer stops auto
matically. To record on the other side of th
tape, turn the tape over and repeat steps 1!
and 11.
Refer to P.7 ®
Notes:
When the record time programmed is greate
than the set recording time, the excess time i
indicated in the display while flashing.
To delete a selection from program, call th
particular selection
with the [CALL] butto
and then press the [STOP/CANCEL
(@,
button.
.
Enter the track number nextto the lastselectio.
of the programmed sequence.
Advertisement
