JVC XL-M505TN Instructions Manual page 17

Auto Edit Recording
As much as possible of the selections chosen will
be automatically recorded on the A and B sides of
the cassette in sequence.
Programming Edit Recording
You can make your favorite selections from 7 CD
and record them on cassette.
Notes:
To cancel the edit record mode, press the
[PLAY MODE] button.
The maximum program step is sixteen per
one side of the tape.
If your cassette deck is incorporating JVC's
COMPULINK system, synchronized recording
feature will function.
2
3
4
A. EDIT
SIDE-A
STEP REMAIN
Sn
92300
7
A. EDIT
SIDE-A
STEP REMAIN
fe 3-0d
—16—
Editing
For further details, see "COMPU LINK CON-
TROL SYSTEM".
Tracks ona CD assigned number 32 or greater
cannot be entered in the program.
How to Perform Auto Edit
Recording
1.
2:
3.
N © OA
Press the [STOP ( m )/CANCEL} button.
Press the [EDITING] button so that A EDIT is
displayed in the MULTI-MODE DISPLAY.
Set the recording time according to the type of
tape cassette loaded, using the [TIME/TRACK
(+10, +1] buttons.
[Example]
To set a period of 46 minutes, press the [+10]
button four times and then the [+1] button six
times.
. Press the [SIDE A/B] button.
. Press the [DISC] button @* to specify the
disc required.
. Total playing time appears in the MULTI-
MODE DISPLAY.
Press the [MEMORY] button, while both the
track number and the step number are flash-
ing. If flashing stops before you press
MEMORY button, press the [DISC] button
@* again.
Set the cassette deck to the recording mode.
Press the [PLAY (» )/PAUSE (88 )] button.
When the final selection, programmed on the
Aside, ends, CD player-changer stops auto-
matically. To record on the other side of the
tape, turn the tape over and repeat steps 8
and 9.
Note:
*
When starting editing from any particular se-
lection of the disc, press the [SEARCH
(k¢4 , be! )] button to indicate the selection
and then press the [MEMORY] button, while
both the track number and the step number
are flashing.
After proceeding step 7, remaining time ap-
pears to show the available recording time.
If you wish to record as much as the time
displayed, perform steps 5-7.
Refer to P.7 @.