Advertisement
Playing Audio via Audio Input (Aux) Connection
• Use a 3.5mm to 3.5mm audio cable to connect a PC, tablet, smartphone, or TV
headphone port to the AUX port on the soundbar.
• Use an RCA to 3.5mm audio cable to connect a BlueRay DVD Player or TV audio
output port to the AUX port on the soundbar.
• Press the
button on the soundbar or the INPUT button on the remote control to
switch to audio Input mode. The display will illuminate
• In this mode, playback can only be controlled on your connected device.
Optical Mode
1.
Connect one end of an Optical cable (not provided) to the OPTICAL port on the
soundbar (Optical digital Input). Then, connect the other end to the OPTICAL OUT
port on the TV or other device. The TV or other device must have an Optical digital
output.
2.
Set the TV to PCM Stereo or Stereo 2.0.
3.
Start playing on the TV.
4.
Press the Input button on the soundbar or remote control to activate OPTICAL
mode. When successfully connected, the LED display will show
5.
Operate your audio device directly for playback features.
6.
Press the Volume +/ buttons to adjust the volume to your desired level.
HDMI eARC Mode
e-ARC (Enhanced Audio Return Channel)
This soundbar supports HDMI with enhanced Audio Return Channel (e-ARC). If your TV is
HDMI e-ARC compliant, you can hear the TV audio through your soundbar using an HDMI
cable (not provided).
1.
Connect one end of a high-speed HDMI cable to the HDMI eARC port on the
soundbar, and the other end to the HDMI (e-ARC) port on your TV.
2.
Press the
switch to HDMI eARC mode. When successfully connected, the display will show
. If the TV supports HDMI ARC, the display will show ARC.
3.
Press the Volume +/ buttons to adjust the volume to your desired level.
4.
If you wish, you can change the audio settings by using the relevant buttons on the
remote control.
22
button on the soundbar or Input button on the remote control to
.
.
Advertisement
