Advertisement
Power On/Off
1.
Plug one end of the power cord into the AC IN port on the soundbar and the other
end into an electrical outlet (see the following diagram). The soundbar will be in
standby mode,
2.
Turn the soundbar on by pressing the Power button on soundbar or the remote
control. The default input mode will automatically appear on the display.
3.
Press and hold the Power button on the soundbar or the remote control for 2
seconds to switch it off. Then, if you want to switch the soundbar off completely,
disconnect the power plug from the electrical outlet.
Auto Standby
• The soundbar will automatically go into standby mode when there is no user input for
20 minutes.
• To switch the soundbar off completely, remove the power plug from the electrical
outlet. Turn the soundbar off completely to save power when not in use.
• The display will turn off after 20 seconds of no user input. The display will wake up
again when you press the Power button on the soundbar or remote control or when
increasing or decreasing the volume from a connected device.
--
17
Advertisement
