Advertisement
Connect a Bluetooth device:
1.
Turn on the soundbar and press the
Input button on the remote control to switch to Bluetooth mode.
the display and the soundbar will be in pairing mode.
2.
On the Bluetooth device, enable Bluetooth and select KASBD712AJA from the list
of devices to start connection (see the Bluetooth device
enable Bluetooth). If prompted for a password, enter 0000 .
3.
Wait until you hear the voice prompt from the soundbar. If successfully connected,
will stop flashing and appear solid on the display.
4.
Select and play audio files or music on your Bluetooth device.
Using the Bluetooth device with the soundbar:
• If you receive a phone call while playing music from a Bluetooth device, the music will
pause and resume when the call ends.
• If your Bluetooth device supports AVRCP profile, you can press
control to skip to a track.
• Press and hold the Setup button for more than 2 seconds to restore factory default
settings.
• Press and hold the Pair button on the remote control for more than 2 seconds to
disconnect the paired Bluetooth device or reconnect the last disconnected Bluetooth
device.
• Use the volume buttons on the soundbar or on the remote control to adjust the volume
to your requirements.
• To exit Bluetooth, select another input source. When your switch back to Bluetooth
mode, the Bluetooth connection remains active.
• Press the Volume +/ buttons to adjust the volume to your desired level.
button repeatedly on the soundbar or the
will flash on
on how to
on the remote
19
Advertisement
