Table of Contents
Advertisement
94
Aud i active
lane assist
Activating and deactivating
Applies t o vehicles: with active lan e assist
Fig. 96 Turn signal lever: Active lane assist butto n
Fig. 97 Windshie l d: Active l ane assist camera viewing
wi ndow
-
I
~
Press the ¢
fig. 96
button to activate or de-
activate the system. The indicator light .
or .
in the instrument cluster will illumi-
nate or go out.
Instrument cluster indicator light
•
Ready:
The indicator light shows that the
system is ready to use . The system can now
warn you if you are about to cross a known
lane marker line .
•
Not ready:
The ind icator light shows that
the system is turned on but unable to send a
warning . This can be due to the following :
- There is no lane marker line .
- The relevant lane marker lines are not de-
tected (for example, markings in a construc-
tion zone or because they are obstructed by
snow, dirt, water or backlight ing).
- The vehicle' s speed is below the speed need -
ed to activate it, which is about 40 mph (65
km/h) .
- The lane is narrower than about 8 ft . (2 .5 m)
or wider than 15 ft (4 .5 m).
- The curve is too sharp .
- The driver's hands are not on the steering
wheel.
(D
Tips
Make sure the camera's field of view
¢ fig.
97
is not obstructed by stickers, de-
posits or anything else. For information on
cleaning, refer to ¢ page 209.
Active lane assist display in the
instrument cluster
Applies to vehicles: wit h act ive lane assist
Fig. 98 Display: Activ e lane assist is switched on and is
warning
Fig. 99 In strume nt clust er: Active l ane assist is switch ·
ed on but not ready t o provid e warnings
You can call up the active lane assist display
using the buttons in the multifunction steer-
ing wh eel ¢ pag e 24.
An additional indicator appears in the Head-
up Display*.
When active lane assist is switched on, the
system indicates which lines are detected by
displaying solid lines on the left and/or right
side of your vehicle:
.,..
Advertisement
Table of Contents
