Table of Contents
Advertisement
236
Checking
and filling
The washer fluid container is marked with the
symbol$ on its cap ¢ fig. 194, ¢ page 224,
fig. 188 .
.,. Before you check anything in the engine
compartment,
always read and heed all
WARNINGS
¢
A
in Working in the engine
compartment on page 222 .
.,. Lift the filler cap tongue to add washer flu-
id. You can fill the container to the top .
.,. Press the cap back onto the filler neck after
filling the container .
You can find the reservoir
capacity
in the table
in¢ page 290.
Clean water should be used when filling up. If
possible, use soft water to prevent scaling on
washer jets. Always add a glass cleaner solu-
tion (with frost protection in the winter).
Do not mix engine coolant antifreeze or
any other additives to fill up the wind-
shield washer reservoir.
Advertisement
Table of Contents
