Table of Contents
Advertisement
M
N
0
I.J
"".
rl
I.O
"'
rl
"'
rl
Automatic headlights
You can adjust the following settings in the
Automatic headlights menu:
Headlights activation time - You can adjust if
the headlights switch on Early, Med. or Late
according to the sensitivity of t he light sensor.
Audi adaptive light* - You can switch adaptive
light On and Off.
Daytime running lights
USA models: You can switch the dayt ime run-
ning lights on and off .
Canada models: The function cannot be
turned off . It is activated automatically each
time the ignition is switched on. This menu
item is shown "greyed out" .
Coming home, Leaving home
The coming home function illuminates the
area outside the vehicle when you switch the
ignition off and open the driver's door. To turn
the function on, select Lights when leaving
car > On.
The leaving home function ill uminates the
area outside the vehicle when you unlock the
vehicle. To turn the funct ion on, select Lights
when unlocking car > On.
The coming home and leaving home functions
only operate when it is dark and the light
switch is in the AUTO position.
Clear vision
45
Turn signals and high beam lever
The lever on the left side of the steering col-
umn is used to operate the turn signals and
the high beam as well as the headlight flash-
er.
Fig. 38 Turn signal and high beam lever
The turn signa l and high beam lever has the
following functions:
Turn signals ¢
9 ©@
.,. Push the lever up as fa r as it can go to turn
on the right turn signal or down to turn on
the left tu rn signal ¢
fig. 38.
..
0
....
<?
:r
~
... Move the lever briefly unti l you meet resist-
ance and release it to flash three times.
.,. Move the lever (up or down) until you meet
resistance and hold it there to determine
the flashing time for the turn signals.
High beam
~D@
... Push the lever forward to switch on the high
beam .
.,. Pull the lever back towards you to switch off
the high beam.
Headlight flasher
~D
©
... Pull the lever toward the steering wheel to
use the headlight flasher.
Notes on these features
- The
turn signals
on ly work w ith the ignition
swit ched on. The indicator lights
a
or .
in the instrument cluster ¢
page 12
also
blink.
- After you have turned a corner, t he turn sig-
nal switches off automatically .
- The
high beam
wo rks only when the head-
lights are on . The indicator light
El
in the
..,.
Advertisement
Table of Contents
