Table of Contents
Advertisement
M
N
0
<.J
'SI:
,....,
\!)
1.1'1
,....,
1.1'1
,....,
- Under certain cond itions (such as a spor-
ty driving style, w inter condit ions or un-
paved roads), the pressure monitor
indicator may be delayed.
- Ask your author ized Audi dealer if run-
flat tires may be used on your vehicle.
- The tire pressure monitoring system may
stop working when there is an ESC mal-
funct ion.
- Using snow chains may result in a system
malfunction.
- The tire pressure monitoring system on
your Audi was developed using t ires with
the "AO" or "RO" identification on the
tire sidewall
c>
page 257.
We recom-
mend using these t ires.
Reset tire pressure monitoring
system
If the tire pressure is adjusted, wheels are ro-
tated or changed, the TPMS must be reset via
MMI.
"' Before stor ing the new tire pressures, check
that the current pressures on all four t ires
correspond to the specified values and
adapt the pressures to the current load
c> page 244.
"' Switch on the ignition.
"' Select in the MMI:
!CAR !
func t ion button>
(Car)* syst ems contro l button
> Servicing
&
checks > Tire pressure mon ito ring > Store
tire pressures> Yes, store now .
Do not store the tire pressure if the re are
snow chains on the tire. Otherwise, a sys-
tem ma lf unction may occur.
Tire s an d wheel s
269
•
•
Advertisement
Table of Contents
