Advertisement
Store The Unit When Not In Use
Step 1
*Drain the unit's water collection
tray then reinstall the bottom
drain plug back in.
Step6
Step 1: Drain the unit's water collection tray according to the instructions on page 20.
Step 2: Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent
mold.
Step 3: Turn off the appliance and unplug it.
Step 4: Clean the machine.
Step 5: Clean the air filter according to the instructions in the previous section. Reinstall the
clean, dry filter before storing.
Step 6: Remove the batteries from the remote control.
NOTICE
• Be sure to store the unit in a cool, dark place. Exposure to direct sunshine or extreme
heat can shorten the lifespan of the unit.
• The cabinet and front may be dusted with an oil-free cloth or washed with a cloth
dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse
thoroughly and wipe dry. Never use harsh cleansers, wax or polish on the cabinet front.
Be sure to wring excess water from the cloth before wiping around the controls. Excess
water in or around the controls may cause damage to the unit.
Step 2
12
hours
Step 5
22
Step 3
*Please refer to the
actual plug, and the
legend is for reference only.
Step4
Advertisement
