NOTICE
Once the exhaust hose assembly and adjustable window slider are prepared, choose one of the
two installation methods based on your window type.
3 - Complete Sealing of Window:
Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the
window sash and frame as shown.
Foam seal A
(Adhesive type)
H
u
n
g
W
n i
4 - Hung Window Installation:
Step 1: Insert the window slider assembly into the window opening.
Step 2: Cut the non-adhesive foam seal C strip to match the width of the window. Insert
the seal between the glass and the window frame to prevent air and insects from
getting into the room.
Step 3: If desired, install the security bracket with 2 screws as shown.
5 - Sliding Window Installation:
Foam seal B
(Adhesive type-shorter)
d
o
w
n I
s
a t
l l
t a
o i
n
Foam seal A
(Adhesive type)
l S
d i
n i
16
Foam seal B
(Adhesive type-shorter)
g
W
n i
d
o
w
n I
s
a t
l l
t a
o i
n
Need help?
Do you have a question about the MAP08S1JWT-B and is the answer not in the manual?
Questions and answers