Interrupting A Programme; Ending A Programme Before Time; With Childproof Lock Activated; Drum Illumination - V-ZUG AdoraDry V6000 Operating Instructions Manual

5 Operating the appliance
5.9

Interrupting a programme

▸ Touch the
– In the TouchDisplay appears: «Pause – Con-
tinue with button
▸ Touch the
– The programme is resumed.
Each time a programme is interrupted, the programme sequence is delayed by
5 minutes.
5.10

Ending a programme before time

▸ Touch the button.
– The programme is aborted.
– All settings are cleared.
5.11

With childproof lock activated

The «Childproof lock» user setting must be activated to use the childproof lock (see
page 26).
When the childproof lock is activated, the appliance can no longer be operated once a
programme has started or if no button has been touched for over 20 seconds. A code
must be entered to unlock the appliance.
▸ When the childproof lock is activated, touch any
button on the TouchDisplay.
– The input field for the code appears in the
TouchDisplay.
▸ Touch the digits 7, 3, 1 in sequence.
▸ Touch the button.
– The appliance is unlocked.
After being unlocked, the appliance can be operated normally. The childproof lock is
automatically activated as soon as the programme starts.
5.12

Drum illumination

The drum illumination automatically switches on whenever the appliance door is opened
and switches off when it is closed. If the appliance door is left open, the drum illumina-
tion switches off automatically within 2 minutes.
▸ Touch the
tion on or off when the appliance door is open.
If the appliance door is opened during or at the end of the standard programme,
the drum illumination does not switch on automatically because this is the most
energy-efficient programme and the energy requirements are reduced to a min-
imum.
20
button.
»
button again.
button to switch the drum illumina-
Extra dry
Pause
Continue with button
Childproof lock
0 0 0
Code
731
0 1 2
5 6 7
3 4
8 9