Bauknecht OBBC Ecosilent 8650 Daily Reference Manual page 35

Quick Guide
TROUBLESHOOTING
In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS POSSIBLE CAUSES
No water in the water supply or the tap
The dishwasher does is closed.
not fill the water. Display
shows: and F6, both The inlet hose is bent.
On/Off and START/Pause
LEDs are blinking rapidly. The sieve in the water inlet hose is
clogged; it is necessary to clean it.
Dishwasher finishes the
Drain hose positioned too low or si-
cycle prematurely. Display
phoning into home sewage system.
shows: F15 and both On/
Off and START/Pause LEDs
Air in water supply.
are blinking rapidly.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.bauknecht.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model
identifier that can be used to consult the https://eprel.ec.europa.eu database portal.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwash-
er and reboot.
After having carried out the verification and cleaning, turn off and turn on the
dishwasher and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check
for siphoning into home sewage system, install air admittance valve if necessary.
Check water supply for leaks or other issues letting air inside.
EN
IEC 436
:
3