Maintenance Procedures - Bartell Global T-5500 PRO Owner's Manual

RIDE-ON SCRAPER
OWNER'S MANUAL AND
PARTS BOOK
 Inspect the fuel lines and connectors before each job or at the beginning of the day to
detect any possible problems. Never check for propane leaks with an open flame.
 Never use ammoniated household-type detergents to detect leaks or to clean any portion
of the fuel system or the tank. These substances can cause cracks on brass fittings and
on the fuel line. If the leak cannot be located, take the tank to a certified liquid petroleum
gas service representative.
 Never store or carry propane containers in a closed space or inside your passenger
vehicle. Propane containers are equipped with safety devices that relieve excessive
pressure by discharging gas to the atmosphere.
 Never fill a tank more than 80% of capacity. Overfilling can cause uncontrolled gas flow,
which in turn can cause fire and/or an explosion.
2. What to Do If You Smell Gas
 Immediately extinguish any open flames, pilot lights, and all smoking materials.
 Turn the engine OFF; do not touch any electrical switches or other devices that may
produce a spark.
 Shut OFF the fuel flow switch.
 Open all doors and windows to allow maximum ventilation.
 Leave the area until the odor clears.
 Inspect the fuel lines and connectors to determine the source of the leak. Correct the
problem before you use the Terminator
1. Change Hydraulic Oil every 18 months with NUTO H 46 or ISO 46 or if fluid is overheated
200°F or higher.
2. Change hydraulic filter every 50 hours initially.
3. Clean Caster Wheel and Back Tires with wire wheel when necessary.
4. Look for leaks, find and tighten fittings. Do not over-tighten fittings.
5. Check all hoses and clamps once a week.
6. Inspect rear tires and lug bolts. Tighten lug bolts as needed to 70 ft.-lbs. torque.
7. Check wheel hub every 60 hours of operation. Wheel hub pack nut should be torqued from
310 to 350 ft.-lbs.
®

22. Maintenance Procedures

18
again.
OIPB-I12030