Introduction; About This Manual - Bartell Global T-5500 PRO Owner's Manual

RIDE-ON SCRAPER
OWNER'S MANUAL AND
PARTS BOOK
®
The Terminator Carpet and Tile Removal Machine is intended for use on large demolition and
asbestos abatement projects as well as smaller floor covering removal jobs. Designed and built
by experienced floor covering demolition and installation experts, the machine incorporates
several design features that are essential for efficient operation:
• Tricycle wheelbase and short turning radius allows for better turning ability - especially in
narrow spaces.
• Jaw position and tool position adjustments allow for changing the angle of the blade for any
application.
• Ballasts in the front and rear provides extra traction needed for tile and glue removal.
• Built-in forklift transportation slots allow for easy loading and unloading at job sites.
• Variable displacement hydraulic control for a smooth start and stop.
If operated and cared for as instructed in this Manual, the Terminator
safe, and efficient performance.
This Manual contains the information and procedures to assist you to operate and maintain the
Terminator ® machine safely and correctly. Read this Manual before you operate or service the
equipment. If you need additional information or assistance, please get in touch with our
Customer Service Department:
Innovatech Products & Equipment Co.
4701 Allmond Ave
Louisville, KY 40209
(425) 402-1881 or 800-267-6682
Fax (425) 402-8547
Email: service@InnovatechProducts.com
NOTE: Throughout this Manual, directional instructions (left, right, up, down, push, pull, etc.)
are given from the point of view of the operator performing the action.

1. Introduction

2. About This Manual

6
OIPB-I12030
® provides trouble-free,