Horizontal Installation: Service Access - Nibe ClimateMaster Tranquility 30(SE) Series Installation, Operation & Maintenance Manual

Left Return Back Discharge
Air Flow
Return
Air Flow
OSP
Left Return Straight Discharge
Return
Air Flow
OSP
Notes:
1. While clear access to all removable panels is not required, installer
should take care to comply with all building codes and allow
adequate clearance for future eld service.
2. CCP and BSP requires 2-feet of service access.
3. Blower service access is through back panel on straight discharge
units or through panel opposite air coil on back discharge units.
4. OSP are removable panels that provide additional access to the
units interior. Clear access to OSP panels is not required and they
are not to be used in place of the mandatory CCP and BSP panels.
w w w. c l i m a t e m a s t e r. c o m
TranquiliTy® 30 (SE) PrEMiEr TWO-STaGE SEriES– iOM
Actual area is 7.25" w x 8.875"h
Guides indicate .125" bleed all around
Supply
BSP
Front
OSP
CCP
BSP
Supply
Air Flow
Front
OSP
CCP
Horizontal Installation:
Service Access
Right Return Back Discharge
BSP
OSP
Right Return Straight Discharge
BSP
Supply
Air Flow
OSP
= Mandatory Service Access 2-foot (61 cm)
= Optional Service Access 2-foot (61 cm)
Legend:
CCP = Control/Compressor Access
BSP = Blower Service Panel
OSP = Optional Service Panel (not required)
C r e a t e d : M a r c h 6 , 2 0 2 4
Models:
SE
024-072
Supply
Air Flow
Return
Air Flow
Front
OSP
CCP
Return
Air Flow
Front
OSP
CCP
PA G E : 1 5