Nibe 360P Quick Start Manual
Hide thumbs
Also See for 360P:
- Installation and maintenance instructions manual (60 pages) ,
- Homeowner user manual (9 pages)
Table of Contents
Advertisement
Quick Links
Home owner user pack for the Nibe 360P
How to use this pack:
Section 1 – Please print these pages and laminate back to back to create a single document. This laminated
document should be left with the Unit at all times.
Section 2 – Please print these pages and bind together. This bound document should be included in the
home owner pack provided to all tenants.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nibe 360P
Summary of Contents for Nibe 360P
- Page 1 Home owner user pack for the Nibe 360P How to use this pack: Section 1 – Please print these pages and laminate back to back to create a single document. This laminated document should be left with the Unit at all times.
- Page 2 Section 1...
- Page 3 The air taken out by the NIBE system is replaced by air coming into your house through ducts in the wall and is circulated through the home via the air gap under the internal doors.
- Page 4 ■ Take out the filter and shake off any dirt. Check that the filter is not damaged. New original filters can be ordered from NIBE. ■ Assembly takes place in the reverse order. The cleaning time intervals vary depending on the amount of dust in the exhaust air.
- Page 5 Section 2...
- Page 6 ‘Exhaust Air Source Heat Pump’. This type of heating system has been installed in continental Europe for many years and is now being used more commonly in the UK. The system is made by NIBE, a Swedish company.
- Page 7 When heating is not required, during summer for instance, turn the room sensor down to a lower number as this will prevent the heating from coming on unnecessarily. Within the control panel, you should also periodically check the pressure gauge. If the pointer on the dial drops to 1 bar you should report this to your housing association as a service call may be required.
- Page 8 Summary of general standard settings for heating o Leave circular knob on control panel set at 0 o Leave room thermostat set at 20-21 degrees C o Leave radiator thermostatic valves set on 3-4 o Set the heating for the appropriate season o Do not open windows to clear condensation when bathing or cooking.
Need help?
Do you have a question about the 360P and is the answer not in the manual?
Questions and answers