For The 40-Pin Connector Type Module - Mitsubishi Electric MELSEC-L Series User Manual

6.2.2

For the 40-pin connector type module

(1) Precautions
• Use copper wires having temperature rating of 75°C or more for the connectors.
• Tighten the connector screws within the following specified torque range.
Screw type
Connector screw (M2.6)
(2) Applicable connectors
The 40-pin connector for input module, output module, or I/O combined module is obtained by user.
The following tables list the 40-pin connectors, crimp tool, and pressure-displacement tools.
(a) 40-pin connector
Type
Soldering connector
(straight out type)
Crimp connector
(straight out type)
Pressure-displacement connector
(straight out type)
Soldering connector
(both for straight out and 45-degree
types)
*1 Use cables with outside diameter of 1.3mm or shorter to connect 40 cables to the connector.
In addition, consider the amount of current to be used and select appropriate cables.
(b) Crimp tool and pressure-displacement tools for the 40-pin connectors
Type
Crimp tool N363TT005H
N367TT012H (locator plate)
Pressure-
N707TT001H (cable cutter)
displacement tool
N707TT101H (hand press)
For how to wire connectors and how to use the crimping tool and pressure-displacement tool, contact the
manufacturer.
0.20 to 0.29Nm
Model Name Applicable wire size
*1 2
A6CON1 0.08 to 0.3mm (28 to 22 AWG) (stranded wire)
0.088 to 0.24mm
A6CON2
wire)
28 AWG (stranded wire)
A6CON3 30 AWG (single wire)
Flat cable of 1.27mm pitch
2
0.088 to 0.3mm
*1
A6CON4
wire)
Model name
CHAPTER 6 INSTALLATION AND WIRING
Tightening torque range
2
(28 to 24 AWG) (stranded
LX41C4, LX42C4, LY41NT1P, LY42NT1P,
LY41PT1P, LY42PT1P, LH42C4NT1P,
LH42C4PT1P
(28 to 22 AWG) (stranded
OTAX Corporation
Applicable models
Contact
65
6