Subscribe to Our Youtube Channel
Related Manuals for Symmons Dia AcrivSense SD6350B
Summary of Contents for Symmons Dia AcrivSense SD6350B
- Page 1 SD6350B/E SOAP DISPENSER TOUCH FREE DECK MOUNTED SOAP DISPENSER I NSTALLAT ION A ND MAINT ENA NCE GU IDE I NSTALLAT ION A ND MAINT ENA NCE GU IDE...
-
Page 2: Technical Data
INDEX TECHNICAL DATA TECHNICAL DATA PRE-INSTALLATION INFO PACK CONTENTS INSTALLATION FILLING THE SOAP TANK SETTINGS ADJUSTMENT BATTERY REPLACEMENT SPARE PARTS LIST MAINTENANCE LIMITED WARRANTY 11-12 TROUBLESHOOTING BATTERY POWERED SD6350B ELECTRICAL POWERED SD6350E Capacity 1 Liter / 33.8 oz., or 6 Liters / 1.6 Gallons Power Supply Battery Box for 6xD Alkaline batteries or 12V transformer Soap viscosity for liquid... -
Page 3: Pre-Installation Info
PRE-INSTALLATION INFO PACK CONTENTS Familiarize yourself with the part names and confirm that the parts are included. Check contents Separate all parts from the packaging and check each part with the “Pack contents” section. Make sure all parts are accounted for before discarding any packaging material. If any parts are missing, do not attempt to install your touch free soap dispenser until you obtain the missing parts. -
Page 4: Installation
INSTALLATION INSTALLATION STEP 1 – REMOVE ALL MOUNTING HARDWARE STEP 3 – CONNECTING THE POWER SOURCE Drill a hole in the deck or lavatory for the Remove the protective sticker soap dispenser body and a small hole covering the sensor. Keep away from for the anti rotation pin, according to the the sensor range. -
Page 5: Remote Control Functions
FILLING THE SOAP TANK REMOTE CONTROL FUNCTIONS If your model is an MF model, please refer to the Multifeed installation guide. If available, the soap dispenser remote control can adjust the dispenser’s settings. To use the remote control hold it in front of the sensor at a distance of 10-15cm (4-6”). Attention: The remote control will not operate out of the recommended range (too close Unscrew the soap tank from the pump assembly or too far). -
Page 6: Battery Replacement
BATTERY REPLACEMENT SPARE PARTS LIST Seals and screws kit SD001 Battery models only Sensor kit (single) SD002 When the battery weakens, the LED indicator light will blink at a constant rate when the user’s hands are within the sensor range. The battery must be replaced within two weeks. Pump assembly SD004 To replace the battery in battery models:... -
Page 7: Limited Warranty
Indication Investigation Cause Solution Illustration All parts and finishes of the Symmons products are warranted to the original consumer False Continuous AUX connector not The connector should be inserted fully until purchaser to be free from manufacturing defects in material and workmanship for 5 years... - Page 8 TROUBLESHOOTING Indication Investigation Cause Solution Illustration Soap not Pump is Sensor is AUX connector not The connector should be inserted fully dispensing not making blinking fully inserted until the white o-ring is not visible. sound when when hand Remove the o-ring if necessary O-RING VISIBLE –...
- Page 9 Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184-3804 1-800-796-6667 02.2021 01500516-A...
Need help?
Do you have a question about the Dia AcrivSense SD6350B and is the answer not in the manual?
Questions and answers