Table 21 Flash Codes For Configuration Via Button - WAGO 787-3861/200-1000 Product Manual

787-3861/200-1000
Flash Code (x)
Status LED
1
2
3
4
5
6
7
1)
The blink code is put out cyclically: x pulses (LED green), followed by a break time of 1.5 s. During the break
time and between the pulses, the LED lights up red.
Product manual | Version: 1.0.0
Electronic Circuit Breaker
1)
Figure 10: Configuration routine
Table 21: Flash Codes for Configuration via Button
Signal Output S2
Description
Tripped
Current flow monitoring
Early warning 90 %
Early warning 80 %
Early warning 70 %
Option: external relay control
Tripped or manually switched off
Configuration
33