Thermal Safety; Indirect Safety - WAGO 787-3861/200-1000 Product Manual

Safety

2.4 Thermal Safety

• The surface of the housing heats up during operation. Under special conditions (e.g., in
the event of a fault or increased surrounding air temperature), touching the product
may cause burns. Allow the product to cool down before touching it.
• The temperature inside the additional enclosure must not exceed the ambient tempera-
ture permitted for the mounted product.
• Cooling of the product must not be impaired. Ensure that the air circulation is unob-
structed.

2.5 Indirect Safety

• Only use a dry or cloth or a clothed dampened with water to clean the product. Do not
use cleaning agents, e.g., abrasive cleaners, alcohols or acetone.
• Do not allow the product to come into contact with ketones (e.g., acetone) or chlori-
nated hydrocarbons (e.g., dichloromethane) under any circumstances.
• Do not use hard objects that could cause scratches for cleaning.
• Clean tools and materials are imperative for handling the product.
• The products are not resistant to materials having seeping and insulating properties
such as aerosols, silicones and triglycerides (found in some hand creams). If these
substances occur in the environment of the products, install the products in an addi-
tional housing that is also resistant to these substances.
• Replace any defective or damaged devices.
• Observe possible different technical specifications for mounting that does not corre-
spond to the nominal mounting position.
• Only use accessories authorized by WAGO.
10 Product manual | Version: 1.0.0
Electronic Circuit Breaker
787-3861/200-1000