Connection Examples; Table 19 Relay - WAGO 787-3861/200-1000 Product Manual

787-3861/200-1000

5.4 Connection Examples

In the connection examples given below, additional relays are connected via signal output
S2. To control a relay, signal output S2 must be set to the "External Relay Control" setting
8 Configuration via Button
(see
The resulting behavior of signal output S2 can be found in table "Signal Output S2 – Sig-
naling," column "External Relay Control" (see Signal Output S2).
WAGO offers the following relays for both variants (connection example: relay and all-
pole fuse):
Item no.
857-304
788-304
Product manual | Version: 1.0.0
Electronic Circuit Breaker
[} 32]).
Designation
Socket with miniature switching relay for DIN-35 rails
Socket with miniature switching relay for DIN-35 rails
Planning
Figure 5: Connection Example
Table 19: Relay
25