Removal - NEC N8104-149 User Manual

4-5. Removal

A procedure until it removes a board from a server is shown. For this procedure, removal of a cable and
the removal procedure of a SFP+ module are described. When you remove individually, please carry
out a procedure until it removes the candidate for removal.
In addition, it is not necessary to turn the power of the server OFF, when a cable or SFP module is
removed.
１.
Remove the Cables.
Pull the cable with pressing down the latch
of the cable
２.
Remove the SFP+ module.
1. Flip down the Lever of the SFP+ module
2. Remove the module from the slot toward
to the arrow.
３. Remove the adapter from the server.
Turn the power off after shutdown process on the OS. Then, unplug the power cord of the
server.
For detail information, See the User's guide of the server.

Please use a driver etc., when you are hard to press down a latch.
Important

Attach the dust cover to the SFP+ module. The cover has been kept.
Important
- 41 -