Names And Features Of Component - NEC N8104-149 User Manual

3.Names and Features of Component

Link
Act
Link
Act
(1) PCI Express connector
Connect with PCI slot in the server.
(2) Bracket
Used to secure the product to additional slot in the server.
(3) LEDs (port 1/2)
Indicates status of 10G LAN interface.
Two types of LEDs (ACT, LINK) are provided on each port (port 1/2). See the table below for LED
indication.
LED
Link
ACT
(4) SFP connector (port 1/2)
These slot connects SFP+ module or DA cable.
Bracket
SFP slot
(PORT2)
SFP slot
(PORT1)
 This product has PCI Express connector of x8 type.
Tips
 To install this product in a PCI slot of ｆull-height type, you need to use the
Tips
provided ｆull-height bracket.
COLOR
Green
Yellow
OFF
Green
OFF
 If a failure was detected, make sure the followings:
Important
・ Check if this product is firmly inserted.
・ Check if Lan device is properly connected.
When an LED is indistinct, please change and check the seen angle.

Tips
PCI Express connector
Indicate pattern
状態
On 10G Link
On 1G Link
Off Not Link
On(Blinking) Communicating
Off
- 37 -