Safety Notes - NEC N8104-149 User Manual

Safety Notes

This section provides notes on using the product safely. Read this section carefully to ensure proper
and safe use of the product. For symbols, see (Safety Indications).
Do not use the product for services where critical high availability may directly affect human lives
or high reliability is required.
This product is not intended to be used for control facilities or devices concerning human lives, including
medical devices, nuclear facilities and devices, aeronautics and space devices, transportation facilities
and devices; and facilities and devices requiring high reliability. We assume no liability for any accident
resulting in personal injury, death, or property damage if the product has been used in the above
conditions.
Do not disassemble, repair, or alter the product.
Never attempt to disassemble, repair, or alter the product on any occasion other than described in this
document. Failure to follow this instruction may cause an electric shock or fire as well as malfunctions of
the product.
Disconnect the power plug before working with the product.
Make sure to power off the product and disconnect the power plug from a power outlet before
installing/removing this product. Touching any internal component or cable/connector with its power cord
connected to a power source may cause an electric shock or a fire due to short-circuit, even if the product
is off-powered.
Also make sure that your hands are not wet when installing/removing the product. Failure to follow this
instruction may cause an electric shock as well as malfunctions of the product.
Do not use the product if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the product and disconnect the power plug from
the outlet, then contact the store where you purchased the product or your maintenance service company.
Using the product in such conditions may cause a fire.
Do not hold the cable harness when disconnecting it.
When disconnecting a power cable from the server, hold the cable connector and tab, pull it straight out.
Pulling the cable out by the cable portion or giving mechanical stress to the connector could damage the
cable and connector to result in an electric shock hazard or a fire.
WARNING
CAUTION
- 27 -