Mechanical Specifications; Mounting And Cooling; Table 1-3: Mounting Specifications - Aerotech UFM-ST Hardware Manual

Hardware Manual

1.2. Mechanical Specifications

Line filters should be located as close to the drive as possible with the case connected through a low
impedance connection to earth ground for maximum effectiveness. The unit should be mounted to
earth ground, where possible, with M4 (#8) mounting hardware.

1.2.1. Mounting and Cooling

Table 1-3: Mounting Specifications
Customer-Supplied Enclosure
Weight
Mounting Hardware
Dimensions
Minimum Clearance
Operating Temperature
www.aerotech.com
M4 [#8] screws (four locations, not included)
Airflow
Connectors
UFM-ST
IP54 Compliant
1.13 kg (2.5 lbs)
Refer to Section 1.2.2.
~25 mm
~100 mm
Refer to Section 1.3.
UFM-ST
15