Table of Contents
Advertisement
12
4. USING THE DEVICE
1 Press the hall call button.
2 When the hall call door unlocks, open the hoistway
door.
3 Open the car door and enter the elevator.
4 Close the hoistway door and then close the car door.
5 Press a button on the Car Operating Panel (COP) to
select a floor.
6 When you arrive at the
selected floor, open the car
door and exit the elevator.
7 Close the car door and then
close the hoistway door.
Note that you can press the Alarm
button at any time in case of an
emergency.
Note that there is a keypad phone
located on the COP for use in an
emergency.
• To dial a phone number,
press the red ON/OFF
button on the keypad to
turn on the phone.
• Dial the phone number.
• Press the blue VOL key on
the keypad to raise or lower
the volume.
• Press the red ON/OFF
button on the keypad to
turn off the phone.
Vuelift Mini Owner's Manual
Figure 3
Part No. 001254, 31-m01-2024
Figure 2
Floor buttons
Alarm button
Run/Stop switch
Emergency phone
Speaker
Advertisement
Table of Contents
