Dimplex EF830 Let's Get Started page 14

Product function
Viewing the timer setting
1. Press the
2. Press the "+" or "-" key to check the power-on time of the set timers one by one.
3. To check the power-off time, press the "▲" key.
4. Press the "+" or "-" key to check the power-off time of the set timers one by one.
5. To delete selected setting, press the "C" key.
Activation timer
Press the key to activate the timer function.
NOTE: When the timer is active, the heating level must be manually selected.
If the heater function is not selected, only the flame effect goes on at the set
power-on time.
Automatic heating mode
Press the "IC" key to activate automatic heating mode. The "AUTO" icon appears on
the display. And this function has two effects:
1. Adaptive start
After the automatic heating mode is turned on, if the weekly timer is turned on and
in the standby mode, within 20 minutes before the scheduled start-up time, the
heater will make three corresponding heating methods according to the current room
temperature.
1) The room temperature is lower than the set temperature by around ≥10°C, the high
heating power will be turned on.
2) The room temperature is lower than the set temperature by around ≥5°C but
<10°C, the lower heating power will be turned on.
3) If the room temperature is less than around 5°C below the set temperature, the
heating will not be turned on.
2. Automatic heating
After turning on automatic heating mode, if the heater does not turn on the weekly timer;
or the weekly timer is turned on, and it is in the default heating period, the heater will also
make three corresponding heating methods according to the current room temperature:
1) The room temperature is lower than the set temperature by around ≥6°C, high
heating power will be turned on.
2) The room temperature is lower than the set temperature by around <6°C, lower
heating power will be turned on.
3) When the room temperature reaches or exceeds the set temperature, the heater
will stop heating.
NOTE: The working temperature in the automatic heating mode will be a little
different according to the different ambient room temperature.
14
5059340774787_MNL_EN_V02.indd 14 5059340774787_MNL_EN_V02.indd 14
key.
EF830
26/07/2023 2:27:26 pm 26/07/2023 2:27:26 pm