Removing The M.2 Sata Module - Clevo P670RG Series Service Manual

Removing the M.2 SATA Module

M.2 SATA-1 Removal Procedure
1. Turn off the computer, remove the battery
2. Locate the module, it is visible at point
3. Carefully remove the screw
4. The module will pop-up
3
5. Lift the module up and off the computer
3
6. Reverse the process to install a new module.
a.
1
b.
2
(page 2 - 6).
( )
Figure 14a .
1
from the module ( Figure 14b ) .
2
( Figure 14c ) .
( )
Figure 14d .
c.
d.
3
3
Removing the M.2 SATA Module 2 - 19
Disassembly
Figure 14
M.2 SATA-1 Module
Removal
a. Locate the module.
b. Remove the screw.
c. The module will pop-up.
d. Lift the module up off the
socket.

3. M2 SATA Module
• 1 Screw