Snmp Community: Modify; Snmp Notification; Figure 67 Snmp Community: Modify; Table 49 Snmp Community: Modify - ZyXEL Communications Dimension ES-1552 User Manual

Chapter 18 SNMP

18.4.2 SNMP Community: Modify

Click on the Community ID number or select a Community ID from the Community ID
drop down list box in the SNMP Community screen to modify the settings of an existing
community.

Figure 67 SNMP Community: Modify

The following table describes the labels in this screen.

Table 49 SNMP Community: Modify

LABEL
Community ID
Community
String
Remote Station
IP
Group Name
Apply

18.5 SNMP Notification

SNMP supports a notification mechanism to alert SNMP managers when events occur. There
are two types of notification mechanisms supported by the switch.
• SNMP Notification - SNMP traps are sent to external SNMP management stations.
• Authentication Notification - Failed authentication attempts are logged by the switch.
Use the SNMP Notification section of the SNMP Trap Station screen to enable the
notification mechanisms. Click SNMP > Trap Station to view the screen as shown.
114
DESCRIPTION
This field indicates which community you are modifying.
Click on Remove This Community to delete this user configuration from the switch.
Click on Display All Community to view the main SNMP Community screen.
An SNMP community string is a text string that acts as a password. It is used to
authenticate messages that are sent between the management station (the SNMP
manager) and the device (the SNMP agent). The community string is included in
every packet that is transmitted between the SNMP manager and the SNMP agent.
Type the community string for this community.
Specify the IP address of the remote SNMP management station in dotted decimal
notation.
Select the SNMP group you want to belong to this community.
Click this to save your settings to the switch.
ES-1552 User's Guide