Ip Address Based Qos; Figure 40 Tos Based Qos; Table 20 Tos Based Qos - ZyXEL Communications Dimension ES-1552 User Manual

Figure 40 ToS Based QoS

The following table describes the labels in this screen.

Table 20 ToS Based QoS

LABEL
Mode
Change
Priority
TOS,
Priority
Apply
Change
Settings

11.4.6 IP Address Based QoS

You can configure the switch to assign a higher priority to packets coming into the switch
from specific IP addresses. Select IP Address Based QoS in the QoS Enhancement Setting
screen to view the following screen.
ES-1552 User's Guide
DESCRIPTION
Select ToS Based QoS to specify mapping rules between ToS priority and IEEE 802.1p
priority for incoming packets on the switch.
Configure the following:
• TOS - Select the ToS priority for which you want to change a priority mapping.
• Priority - Select the IEEE 802.1p priority you want to assign to the packets with the
ToS priority you specified in the TOS field.
Click Change to view your changed settings.
Note: The changes are not applied until you click Apply Change
Settings.
This is a summary table of your ToS priority to IEEE 802.1p priority mappings. The TOS
column indicates the ToS priority of the incoming packets and the Priority column
indicates what IEEE 802.1p priority gets assigned to those packets.
Click this when you have reviewed the changes you want to make and you want to save
them to the switch's memory.
Chapter 11 QoS
77