Table of Contents
Advertisement
1
Light Sensor
2
Camera Lens
3
Microphone
4
Infrared LEDs
• Allow you to see clearly in a dark environment.
5
LED Indicator
It is set to off by default. You can turn it on using the app (Setting > Camera Setting >
LED status).
In Direct Connect Mode:
• Orange is steadily on when the baby unit is connecting to the parent unit.
• Orange flashes slowly during video streaming.
In App Connect Mode:
• Green is steadily on when the baby unit is connected to Wi-Fi.
• Green flashes slowly during video streaming to Wi-Fi.
6
ON/OFF Switch
• Power it on or off.
7
Speaker
8
Power Jack
9
Temperature Sensor
10
Wall Mount Slots
11
PAIR
• To enter pairing mode, press and hold the PAIR key for three seconds until you hear a
beep sound. Then follow the app instructions to connect the camera to a 2.4GHz Wi-
Fi network.
• To reset the baby unit, press and hold the PAIR key until you hear a beep sound.
Release the PAIR key, and then press it again five times until you hear another beep
sound. The baby unit will emit another beep when the reset is complete. After that,
the baby unit will reboot.
7
Advertisement
Table of Contents
