SELECTION
● SPOT or ROOM MODE
● LOCK or UNLOCK
● TEMPERATURE UNIT
To change the temperature of the entire room,
select 'Room mode'. For targeted cooling of
machinery servers or people etc select
'Spot mode'.
3 sec
•
If you want to see room temperature,
when unit is operated, push 'mode' and
'∨' button simultaneously for 3 seconds.
•
Light be on the 'Room LED' when room mode set.
•
If you press '∨' for 5 seconds when the unit is
turned off, you can control 'LOCK, UNLOCK' mode.
5 sec
•
You can set 'UNLOCK' or 'LOCK' after pressing
'∧' button.
•
If you want to change temperature unit ℉ ↔ ℃,
when the unit is stopped,
push '∨' and '∧' button simultaneously
for 3 seconds.
3 sec
Applicable only when cooling mode.
13