Attaching To A Camcorder Using Brackets - Sony CBK-RPU7 Operating Instructions Manual

3
Pass the ø15 rods through the holes in the rod
bracket, then turn the left and right clamp
levers to fasten in position.
Note
If the clamp lever is loose, the unit may fall off
during use.
4
Connect the camcorder to SDI connector 1
using an SDI cable (available separately).
To transmit video using a wireless connection,
connect a 5G communications device to a USB
connector using a USB cable (available
separately).
To transmit video using a wired connection,
connect a router or computer to the LAN
connector using a LAN cable (available
separately).
Connect to router or computer
Connect to 5G communications device
*1 The function is the same regardless of which USB
connector is used.
Clamp lever
Note
Turn off the unit before connecting/
disconnecting an SDI cable, USB cable, or LAN
cable to/from this unit.
Attaching to a Camcorder using
Brackets
You can attach the unit to a PXW-Z750,
PXW-Z450/Z580, or PXW-X400/X580 camcorder
using camera mount brackets.
Camera mount bracket A
Camera mount bracket B
M3 screw holes, plate thickness
2.5 mm, screw protrusion of
3 mm or less
Attachment procedure
1
Attach camera mount bracket A to the
camcorder.
Fasten the bracket using the four screws at the
front.
*1
10
Accessory shoe
Hole diameter: ø7