Monitoring Page
This page displays the status of the unit.
System Message tab
This tab displays caution and warning messages.
For details about caution and warning messages, see "Warning/Caution System" (page 36).
Freeze Detection tab
This tab is used to monitor the input signals from the SDI connectors, and to set the function that displays
a caution message if it has been determined that a video freeze has occurred. When a freeze is detected,
the detection result is displayed on the [System Message] tab and on the Message screen (page 35) on the
display of the unit.
Item
Freeze Detection
Freeze Frame Limit Sets the number of consecutive frames that are the same as the previous frame for
Freeze Frame Bits
Description
Enables/disables the freeze detection function.
• ON
• OFF
determining whether the image has frozen.
• 1 to 30 to 120
Sets the number of high-order bits of the baseband signal (10 bits) to compare when
determining whether the image has frozen.
• 1 to 10
19