Table of Contents
Advertisement
Item
RTT(Max)
Streaming Page
Configuration tab
This tab is used to display, create, and modify the configuration of the unit.
Up to five configurations can be configured, which
can be modified or added to match the
application.
Tx ID (Transmitter ID) is an ID that identifies the
transmitter. This value is required when creating a
destination on a receiver. The value differs for
each device.
Configuration operations
When a configuration is selected in the list,
buttons for the following operations are displayed
on the right side.
[Apply]: Switches to the selected
configuration. The unit may need to be
rebooted.
[Edit]: Use to create or edit a configuration
using the wizard.
[Delete]: Deletes the configuration settings.
Note
The currently used configuration cannot be
deleted.
You can click the name of a configuration to
rename it. After entry, press the Enter key to
confirm the settings.
Description
Displays the maximum value of the Round Trip Time (RTT) between
transmitter and receiver.
Tx ID (settings required on receiver side)
22
Advertisement
Table of Contents
