Pioneer DVR-5100H-S Service Manual page 95

Table 2: Key operations in Specific Channel Setting mode
(effective only during recording/playback clad
| Key | Operation | Setting (+: Defauitt
Switches cyclically between General
DIG/ANA Setting mode and Specific Channe!
Setting mode.
INPUT SELECT,
CHANNEL +/-- Switches inputs or channels.
(+R)
"4 x3, x3 m (#1) Sats Syne AGC. ON (+) / OFF
bea CHAPTER SKIP,
CHAPTER SKIP mt Sets Threshold.
"en STILL STEP,
STILL STEP ne Sats Threshold level.
All channels assigned to have specific
settings are canceled, and the
specific settings are reset to their
default values,
PLAY
If the channel currently selected is
assigned to have specific settings,
that assignment is canceled. .
(If that channel is canceled, the
number of remaining channels for
which specific channel settings can
be made increases by 1.)
CLEAR
(*} Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
rangs mentioned below.
* Normal:
The value is fixed, with no display of
the value.
+ Auto Threshold Level:
0-8 (Default: 0}
» Manual Threshold Level:
0-8 (Default: 0)
+ Pedestal Level:
0-8 (Default: 0)
The value can be changed with the
"ail or tim key.
Tha valué can be changed with the
all or Tl» key.
The value can be changed with the
<all or Il» key.
Settings of General Setting mode
are not affected.
Pressing the key resets the settings
of Specific Channel Setting mode for
that channel to the initial values.
Seitings of General Setting mode
are not affected,
The specific-setting data for the
currently selected channel are reset
to their default values.
{But the assignment of a channel
having specific settings is not
canceled.}
Exits AVIO setting for specific areas,
clearing the OSD.
Pressing the kay rasets the settings
of Specific Channel Setting mode for
that channel to the initial values.
Settings of General Setting mode
are not affected (retained).
+R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
95