Table of Contents
Advertisement
[important symbols for good services ]
In this manual, the symbals shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
t
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
2, Adjustments
~
To keep the original performances of the product, optimurn adjustments or specification confirmation is indispensable.
1 aly
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
c
Lo
3. Cleaning
i
Al For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
ww
proper cleaning should be performed to restore their performances.
4. Shipping mode and shipping screws
gi ee
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
Cee
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
ae
5. Lubricants, glues, and replacement parts
yy
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or appiying
ls
glue may !ead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amiount.For replacement parts or tools, the prescribed
ones should be used.
Advertisement
Table of Contents
