Pioneer DVR-5100H-S Service Manual page 80

Subscreen 1 of the second screen is displayed when the ESC, DISP, then "2" keys are pressed, in that order.
Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.
* Subscreen 1: Command log (ALL) of ATA/ATAP! DEBUG OSD
ATA/ATAP
32
> - rm
H
0
0
0
0
0
0
0
0
0
mmmmovoge— --oomTNTMoes
MHorPpama—-WoOorFr
NHOSMhL—-MDBDoo eCo0ccoccCcCCooON ocococcocoore
eoooco0cooo.nd |
CocccecCcCcOo MAMHAAMAMO
0
0
0
0
0
0
0
0
0
2 WO & WOW
NNN MNND PY Dow WWD © & Ww
oooooce°ce
Vv
¢ Subscreen 2: Command log (ERROR) of ATA/ATAP! DEBUG OSD
* Subscreen 3: Writer mentenance information of ATA/ATAPI DEBUG OSD
The cumulative power-on time and error log that are administered by the writer are displayed. Such information is obtained when the power
is turned on. Thereafter, each time the SEARCH key on the remote control unit for service is pressed while subscreen 3 is displayed, the
updating command is sent, and the data on the subscreen are updated. Care must be taken when updating this subscreen, because an
undesired command is inserted if it is executed while recording, etc.
0
0
00 0000 000000
00 0000 000000
0
0
0
0)
@ Power-on time/cumulative power-on time
@ Duration of emission of the laser diode (LD) for DVD-R/DVD while reading
@® Duration of emission of the LD for DVD-W/DVD while writing
@® Duration of emission of the LD for CD-R/CD while reading
©) Duration of emission of the LD for CD-W/CD while writing
80