Table of Contents
Advertisement
Table 6: List of Key Codes
How to enter each check mode
Test made remote control unit : [A8"*]
Remote control unit supplied with the DVR : [AB**]
[No.|
Check Item
Key Input
Operation / purpose
[ESC] > [A.MON]
| Turns on/off EE mode cyclically
Make sure that CGMS = 11 becomes when
EE system
Starts the EE system in EE mode
aExs
:
[PLAY]
ae
:
CGMS = 10 is input.
(same as preview)
(main-untt setting rate}
EE mode: Simulation mode for recording status
[STOP]
Stops the EE system in EE mode
:
¥-mode recording:
After recording for 10 seconds, the
unit starts playback while
displaying the error rate.
33 EHAOR RATE MEASUREMENT ".
DVD-Video:
The error rate is automatically
measured, then the result will be
displayed.
}+———
Error-rate measurement
|[ESC] > [SIDEB]
Enters Adjustment mode for AVIO
|settings are made for the selected input
settings
(TUNER, LINE).
For details, see
" 7.2.4 SETTINGS FOR SPECIFIC AREAS".
[ESC] = [CHP/TIM]
3
|Settings for specific areas .
Determines the settings, then exits
Adjustment mode
How the ESC code is processed
» When the ESC code is received, ESCAPE mode is entered, but in combination with the code(s) that follow(s), a specific meaning is added.
+ If ESC codes are received continuously, ESCAPE mode is retained.
La
|
87
Advertisement
Table of Contents
