Pioneer DVR-5100H-S Service Manual page 123

@ Pin Function
(1) Link relation
LREQ
28 TSERROR1
30
| No. | PinName | VO |
yo
\/0__| |SO data bus of stream interface 1
VO | Packet enable signal input/output of stream interface 1
29 TSRW1
Link-on signal input
Clock input
When LPS is active, input 0.
Link power status output
Link power OFF : 0
Link power ON : 2.7 MHz pulse output (20 dividing of host clock 54 MHz)
Link request output
Clock input for Link control
LPS is active : 49.152 MHz input
LPS=0 0: fixed
PHY/Link control signal input/output
Data input/output between PHY-Link
VO | Packet error signal input/output of stream interface 1
VO | Data read/write enable signal input/output of stream interface 1
VQ | Frame synchronous signal input/output of stream interface 1
@ np
SYNC1
TSSUB1 vO
Not used Connect to VDD or GND through a resistor.
ISO data bus of stream interface 2
47-40 | STREAM2 [7 : 0]
33 PACKETEN2
34 TSERROR2
37
(2) Video interface pins
| 33 SYNC
TSRW2
SYNC2
38 TSSUB2
| No. | PinName _|
peso fvouK tt
33
ie)
vO
VO
vO
vO
VO
vO
Video clock input (27 MHz)
Packet enable signal input/output of stream interface 2
Packet error signal input/output of stream interface 2
Data read/write enable signal input/output of stream interface 2
Frame synchronous signal input/output of stream interface 2
Notused Set to open.
H/L
H/L
H/L
H/L
fear
meee
Video clock output (27 MHz)
Video data signal
Video vertical sync. signal
Video horizontal sync. signal
Field index signal
PWM signal for video PLL
123