Advertisement
Available languages
Available languages
1. Insert the cushion stud into the frame stud hole. Repeat on the other
side.
2. Align the vent ring groove against the cushion opening. Press firmly to
secure in place and ensure that the cushion opening sits into the vent
ring groove.
3. Connect the elbow to the vent ring.
4. With dark grey fabric side facing inwards, insert both upper headgear
straps into the frame from the inside and fold the fastening tabs over
to secure.
Reprocessing the mask between patients
When using between patients, these masks must be reprocessed
according to instructions available on ResMed.com/downloads/masks.
Technical specifications
Mask setting options: For AirSense
Compatible devices: For a full list of compatible devices for this mask, see the
Mask/Device Compatibility List at ResMed.com/downloads/masks.
SmartStart may not operate effectively when using this mask with some CPAP or bi-level
devices.
Pressure-flow curve
™,
Mask Pressure (cmH
™
™
AirCurve
, and S9
O)
2
devices, select 'Pillows'.
Pressure
(cm H
O)
2
4
11
17
24
30
English
Flow
(L/min)
20
35
44
54
61
9
Advertisement
